PP CENTRIFUGAL PUMP MHPP

HORIZONTAL POLYPROPYLENE PUMP “MHPP” SERIES

“MHPP” Pumps are single stage horizontal molded polypropylene corrosion resistant pumps. The pump has similar hydraulic design to any conventional centrifugal pump. Standard dimension process pumps with mechanical Seal/ Gland packing arrangement. Pump required at all of the chemical industries. These pumps give you unusual protection against corrosive & abrasive.

OPERATING RANGE
 
• Capacity Up to :- 180 m3/hr,
• TDH H Up to :- 60 Mtrs,
• Pump Sizes – DN :- 25 mm to 150 mm,
• Speed – N :- 1440 / 2880 rpm at 50 Hz & 1750 / 3500 rpm at 60 Hz
• Temperature :- Up to 110ºc

APPLICATION
 
• Water treatment Plant
• Effluent Treatment
• Filter Press for dyes and chemicals
• Fertilizer Plants Thermal and atomic power plants
• Drugs & Pharmaceutical Industries
• Descaling of Tubes
• Scrubbing of corrosive gases like C12 , Br , I So2 , NH3 , F2 Etc.
• Excellent for vacuum ejectors
• Transferring of concentrated HCL from road tankers
• Paper & Pulp industries
• Pickling in steel rolling mills
• Caustic soda plants :- Chlorinated Brine , Conc , HCL , Dilute H2SO4 etc.
• PHOSPHORIC Acid Plants :- H3PO4 , H2SO4 , HF and their mixtures with or without solid (gypsum) up to 40% conc.
• Gas Washing Plants :- Scrubbed Liquids containing CL2 , BR2 , F2 , I2 , SO2 , SO3 , CO2 , NH3 , Gases etc. with solids replace Hast Alloy.
• Rayon Plants :- Spin bath solution (H2SO4 , ZNSO4 , NaSo4 , etc.)
• Electro Palting
 

TEMPERATURE RESISTANCE
 
• PP 50º TO 80 º C
• PPH 90 º TO 100 ºC
• PVDF 100º TO 115ºC

SALIENT FEATURES:-
 
• The volute chamber is one piece, heavy, joint less design manufactured from Poly-Propylene a chemically inert thermoplastic by the use of an exclusive moulded process.
• All the wetted parts are in solid molded
• construction to with stand corrosion and erosion.
• The impellers are semi-open type hydraulically balanced by back vanes, used in our all pumps to suit both clear & polluted fluids.
• Distance piece of pumps are made from Poly-Propylene so no corrosion problem can pump leakage.
• The bearing bracket made from heavy-duty graded casting coated with anti corrosive paint.
• Reliable fixing of impeller on the shaft by direct thread.
• Centrifugal quiet, vibration free.
• The complete pump-rotating element can be withdrawn towards the motor end without disturbing the suction or delivery pipeline, due to back pull out design.
• The motor remain fixed to base plate.
• The pump rotating element can easily be dismantled into its component. After reassemble no time consuming Re-Alignment is necessary.
• You will find maximum dimensional inter-changeability in the design of “MALHAR” Pump.
• “MALHAR” Pumps requires minimum spare parts and saves you considerable maintenance costs in the long run.
• Pumps are Available in different mounting constructions like Horizontal Bare pump , Monoblock pump and Vertical pump
• Pumps are supply with PTFE Gland Packing or Mechanical seal fitted.
• Polypropylene parts are manufactured by solid injection molding process.
• Mechanical seal are provide of Ceramic / GFT Face or Silicon face with Teflon bellow as per application.
• Gland Packing are used of PTFE Impregnated or PTFE Graphite reinforced as per application Suitable for continuous service.
• Pump casing is provide with external metal ring for construction stability.
• All non PP parts lined with anti corrosive paint to protect corrosive atmosphere
 

MATERIAL OF CONSTRUCTION & SPECIFICATIONS:-
 
• CASING :- Top centerline discharge and Integrated flanges , Single piece , joint less casing formed out of Injection molded polypropylene / PVDF / UHMW.
• IMPELLER :- Hydraulically balanced and accurately matched to casing profile , the semi open type impeller with particle shroud and glass finished smooth flow passage ensure high efficiency low NPSH Performance Impeller made from compressor molded polypropylene / PVDF / UHMW.
• SHAFT: – The shaft is made from SS 316 protected by shaft sleeve of alloy -20 or alumina field Teflon or ceramic.
• BEARING HOUSING: – Made form heavy duty graded casting.
• BEARING :- SKF Ball Bearing
• MECHANICAL SEAL: – Rotary part of seal is made from glass field Teflon & stationary part of seal is made from high alumina field ceramic.
• DISTANCE PIECE: – Heavy duty one piece injection molded poly propylene.